|
Product Detail :
|
Processing of Consumables /Implants /Devices/Accessories, etc, on case to case consignment basis, on rate contract for a period of three years, extendable upto 6 months or till the finalization of the next tender -1.0 1 Ventilator, Invasive Pressure Monitoring, IV Drip sets, Anticoagulation Monitoring and Airway Consumables, 1.01, Bain Circuit Adult, Based on Mapleson "D" system, provided with a corrugated tube, expiratory valve and antistatic bag., Should have co-axial modification of the basic "T"-piece system, developed to facilitate scavenging of waste gases., The process should include patient inspiring fresh gas from the outer reservoir tube and expiring into reservoir tube., Lightweight anesthesia delivery system., 1.00 0.00 0.00, 1.02, Bain Circuit Pediatric, Based on Mapleson "D" system, provided with a corrugated tube, expiratory valve and antistatic bag., Should have co-axial modification of the basic "T"-piece system, developed to facilitate scavenging of waste gases., The process should include patient inspiring fresh gas from the outer reservoir tube and expiring into reservoir tube., Lightweight anesthesia delivery system., 1.00 0.00 0.00, 1.03, Corrugated Tube Connector, Should allow connection between all breathing circuits and the ET tube connector., Thecorrugatedtubeshouldbeexpandable., ShouldAllowmovementofbreathingcircuitatpatientend.Should be made of medical grade PVC., Should be compatible with ETT and tracheostomy tube., 1.00 0.00 0.00, 1.04, Micro Aggregate Blood Filter for Red Cell Transfusion, Filter media should be 40 micron rated polyester screen media with uniform pore size, Should have total filter surface area of 170 Sq.cm, Should have average capacity of filtering 10 units of blood., 1.00 0.00 0.00, 1.05, Packed Red Cell & Whole Blood Leucocyte Reduction Filters., Bedside filtration of one & two unit of packed red blood cells or whole blood, Should have universal spike with microbiological recovery vent, Should be with attached straight administration set/automatic self leveling drip chamber, Performance should consistently average less than 2x105 residual leukocytes per unit, Red cell recovery should average greater than 90%., Filter housing hold up volume should be 25ml for one unit filter and 35ml for two unit filter, It should be single use, 1.06, Forced Warming Blanket, Should be disposable and two layered; • Should consist of non woven propylene fabric for body warming.• Should be usable, with forced air warming units.• Material should be latex free and should meet flammability standard 16 CPR 1610 for safety.•, The manufacturer must have all the below listed types of blankets and should quote the prices separately for separate, blankets• Full Body Adult• Underbody Adult with Arm and Head Openings• Pediatric Full body• Pediatric underbody Blanket.•, Should be compatible with, common machines.• Should be CE certified, 1.00 0.00 0.00, 1.07, Cuff Inflator and Pressure Gauge, •Itisusedtoinflate& preciselymonitorthecuffpressureofET tube, Tracheostomy Tube and LMA Cuff., •Reducetheriskofpressurenecrosisandmucosal ischemia, •Theriskofaspirationcanbeavoided, Eliminatestheuseofsyringestoinflate&deflatethecuffs. Should have release valve to adjust the pressure., •GaugecalibratedincmH2Owiththedetachablelongconnecting tube., •Shouldhaveinflationbulbfortheinflationofthecuff, Shouldhavethehookatthebackoffitsintostandardrail., Should have widely spaced scale markings with colour coded pressure ranges., Ergonomiconehadoperation, 1.00 0.00 0.00, 1.08, Intubation Pillow, •Reusable Intubation pillow for Head elevated laryngoscopy position (HELP) for airway management of Obese &l arge framed, patients., •ShouldbemadeupofDenseFoam., •ShouldbesuppliedwithHeadCradle, •ShouldbeVinylCovered, •ShouldbeCEmarked, 1.00 0.00 0.00, 1.09, Negative Insipratory Force Meter, •Should be disposable, compact, Light Weight & amp;single patient use Negative Inspiratory Force Meter to check the, Negative inspiratory Force of the Ventilated patients with the facility of memory indicator point ertore cord reset highest force, achieved by the patient individually packed ready for use., •Shouldbe ,CE marked, 1.00 0.00 0.00, 1.1, Capnography Co2 Sampling Mask, •Shouldhavetheprovisionforbreathtobreathmonitoringforboth nose & mouth, •Should have the facility to deliver oxygen; allow sampling of exhaled carbon dioxide from mouth & nose at the same time., •ShouldhaveattachedmicrofilterattheCO2samplingportend to protect the CO2monitor, •ShouldbeabletoconnecttheLuerlockconnectortoanyside stream CO2 monitor., 1.00 0.00 0.00, 1.11, Colorimetric Disposable CO2 Detector, For patients from 250gm to 15+kg. Body weight., Should have the facility of activation by pull tab Technique., Should be able to work for 24 hours once activated by pulling tab., Should be able to indicate- Blue green & yellow colour., •Should have larger CO2 viewing window., •Should have 15mm I.D. Standard Taper at Patient End & 15mm O.D. Standard
|
| Tender Detail : |
Consumables /Implants /Devices/Accessories, on consignment basis for CTVS #*. Consumables /Implants /Devices/Accessories, on consignment basis for CTVS |