Ref. No. : 52135229   
Company Name : Can be viewed by Subscribers
Product Detail : Procurement of material under mnrega, non-wired fire resistant glass panes of, minimum 11 mm thickness (120 minutes fire rating), g.i. u beading of 1.6 mm thick g.i. sheet with ceramic tape, ceramic tape 5x20 mm size, aluminium strip 40 mm wide and 2 mm thick, truf paver (500 x 500x 40 mm), ceremic tiles pieces for crazy flooring, white marble makrana second quality plain veined stone pieces for crazy, flooting, fs800h grade flooring panel (size 600 mmx600 mmx32 mm), zinc electroplated pedestals - 300 mm, stone chippings/ screenings 150 micron nominal size, over burnt (jhama) brick aggregate 120 mm to 40 mm size, polyvinyl chloride sheet 400 micron thick, stone ware spouts 100 mm dia 60 cm long, galvanised steel corrugated sheets, gunmetal non-return valve-vertical (screwed end)25 mm dia, vitreous china surgeon type wash basin of size 660x460 mm, 600x120 mm glass shelf with anodised aluminium angle frame, c.p., brass brackets and guard rail of standard size, vitreous china flat back wash basin 550x400 mm, gunmetal non-return valve-verticlal (screwed end) 80 mm dia, c.i. sluice valve (with caps) class ii 300 mm dia, 15 mm battery based sensor pillar cock, cp brass union 40 mm dia, c.c.i. (spun) socketed soil, waste and vent pipe 1.80 metres long, mm dia, c.c.i (spun) socketed soil, waste and vent pipe 1.80 meters long, mm dia, s.c.i. s&s bends with access door 100 mm dia, s.c.i. s&s bends with access door 75 mm dia, s.c.i. s&s double equal junctions 75x75x75x75 mm, s.c.i. s&s double equal junctions with access door 100x100x100x100, mm, s.c.i. s&s double unequal invert branch of required degree, 100x100x75x75xmm dia, s.c.i. s&s, 75 mm offsets for 75 mm dia pipe, s.c.i. s&s, 75 mm offset for mm dia pipe, vitreous china toilet paper holder of standard size, 560 mm dia cover with frame (heavy duty), 560 mm dia cover without frame (heavy duty), galvanized iron (1.6 +/- 0.2 mm) thick reinforcement for small series, casement window/ door frame, sash, mulion & small series sliding, window frame, galvanized iron (1.6 +/- 0.2mm) thick reinforcement for big series, casement window/ door frame, sash mullion & small series sliding, window frame, g. i fasteners 100 x 8 mm, stainless steel (grade - 304) hollow section round/square tubes, stainless steel bolts /square bar and plates, pressed steel door fames (mild steel sheet 1.60 mm ) profile, circular c.i. bok for ceiling fan, pulley 40 mm dia, aluminium primer, red oxide zinc chromate primer, copper acetate, hydrochloric acid, copper chloride, copper nitrate, ammonium chloride, mobil oil, ss pipe 304 grades with press fit technology as per jis 3448 standard, 48.60 mm outer dia, coloured inter locking c.c. paver block, white marble slab makrana second quality plain veined 18 mm, pink marble slab plain 18 mm thick, udaypur green marble slab plain 18 mm thick, black zebra marble slab plain 18 mm thick, sand zone v (jamuna), brass 100 mm mortice latch and lock with 6 levers without pair, handles, pair anodised aluminium lever handles for 100 mm mortice latch, lock, vitreous china flat back wash basin 450x300 mm, vitreous china 10 litres low level cistern without fittings, galvanised steel angle hanger (celling angle) (size 25x10x0.50 mm), galvanised steel connecting clips (2.64 dia and 230 mm long gi wire), galvanised steel soffit cleat (size 27x37x25x0.60 mm), joint filler, joint finisher, joint tape roll, dash fastener/chemical fastener, all drive screws (for gypsum board), primer (for gypsum board), chlorpyriphos 20% e.c. / lindane 20% e.c., chromium plated brackets (curtain rods), acid proof cement, self tapping pan head nickel coated mild steel screws of size 13 x 3.2, mm, fibre joint tape 50 mm wide (90 metre) roll, m.s. butt hinges 125x90x4 mm, 12.5 mm thick fully perforated gypsum board, galvanised wire mesh of average width of aperture 1.4 and nominal, of wire 0.63 mm, 12.5 mm thick tapered edge gypsum fire resistant board, frosted glass sheet or nominal thickness 4 mm (weighing not less, 10 kg/sqm), nickel plated m.s. pipe 25 mm dia., oxidised mild steel screws 35 mm, mild steel conduit pipe (heavy type) isi marked-20 mm dia., mild steel conduit pipe (heavy type) isi marked-25 mm dia, rolling shutters of 80x0.90 mm laths, rolling shutters of 80x1.2 mm laths, top cover of rolling shutters 0.90 mm thick, rawl plug 50 mm (designation 10 nos), teak wood lipping of size 25x3 mm in pelmets, pu primer, 40 mm (average) pu spray having 40-45 kg/m3 density, gi wire netting 3/4, 400 g polythene sheet, flat pressed 3 layer and graded particle board (medium density) grade, conforming to is 3087-18 mm thick, almonium tee channel (heavy duty) with rollers and stop end, aluminium hanging floor door stopper with twin rubber & stopper, hydraulic door closer tubular type aluminium section body, oxidised m.s. casement stay (straight peg type)200 mm not less than, 0.24 kg, extra for providing grilled rolling shutters with 8 mm dia m.s. rod, chequered precast cement concrete tiles 22
Tender Location : Bihar - India
Document Path : Can be viewed by Subscribers
Tender Closing Date : 15/08/2022 at 00:00 Hrs.
Tender Opening Date : 15/08/2022 at 00:00 Hrs.
Sub-Industry/Industry : Municipal Corporations - Non-financial Services   
 Login/Register
Members/Visitors Login to continue
 Email Id:
 Password:


 Forgot Password?
 Tenders by Industry
Skip Navigation Links.
Expand Chemicals TendersChemicals Tenders
more  »
Tenders by Ownership
Central Government/Public Sector Tenders
Co-operatives Tenders
Corporations/ Associations/ Others Tenders
Education & Research Institutes Tenders
Joint Sector Tenders
Non classified Tenders
Private Sector Tenders
Research Institutes Tenders
State Government Tenders
Trust Tenders
 Tenders by State in India
Andhra Pradesh Tenders
Delhi Tenders
Gujarat Tenders
Madhya Pradesh Tenders
Maharashtra Tenders
Rajasthan Tenders
Tamil Nadu Tenders
Uttar Pradesh Tenders
West Bengal Tenders
more  »