Ref. No. : 100669837

Building Material Tenders, Cement Tenders, Civil Work Tenders, Cutting Machine Tenders, Fabrication Work Tenders, Glass Tenders, Hardware And Accessories Tenders, Lab Equipment Tenders, labour work Tenders, Meshes Tenders, Paint Tenders, Painting Work Tenders, Pipes / Fittings Tenders, pump Tenders, R C C Work Tenders, Roof Work Tenders, Sand Tenders, screw Tenders, Steel Tube Tenders, Structure Work Tenders, Taps And Dies Tenders, Tool Tenders, Valve Tenders, Wall Tenders, Washer Tenders, Welding Electrode and Stores Tenders, Window Tenders, Wire And Cable Tenders

Building Material Tenders, Cement Tenders, Civil Work Tenders, Cutting Machine Tenders, Fabrication Work Tenders, Glass Tenders, Hardware And Accessories Tenders, Lab Equipment Tenders, Labour Work Tenders, Meshes Tenders, Paint Tenders, Painting Work Tenders, Pipes / Fittings Tenders, Pump Tenders, R C C Work Tenders, Roof Work Tenders, Sand Tenders, Screw Tenders, Steel Tube Tenders, Structure Work Tenders, Taps And Dies Tenders, Tool Tenders, Valve Tenders, Wall Tenders, Washer Tenders, Welding Electrode and Stores Tenders, Window Tenders, Wire And Cable Tenders

Company Name :	Can be viewed by Subscribers
Product Detail :	CEMENT CONCRETE 124 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 124 (1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size) * DEMOLISHING CEMENT CONCRETE 136 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 136 or richer mix (I/c equivalent design mix) * DEMOLISHING R.C.C. WORK Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. * DEMOLISHING BRICK WORK IN CEMENT MORTAR Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of * DISMANTLING OLD PLASTER Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. * CHIPPG OF CONCRETE AT ALL HEIGHT Hatching & Chipping in all types of concrete average thickness of 40mm in walls, beams, columns & roof ceilings including cleaning the reinforcement at all heights & elevations & disposing the rubbish within a lead of 100M. * E.W IN EXCAVATION BY MECHANICAL MEANS.. Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil * FILLING AVAILABLE EXCAVATED EARTH Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. * CENTERING AND SHUTTERING Centering and shuttering including strutting, propping etc. and removal of * 12 MM CEMENT PLASTER 16 12 mm cement plaster of mix 16 (1 cement 6 coarse sand) * 15 MM CEMENT PLASTER 14 15 mm cement plaster on the rough side of single or half brick wall of mix * MODULAR BRICK WORK 16 Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in Cement Mortar 16 (1 cement 6 coarse sand). * DISPOSAL OF BUILDING RUBBISH Disposal of building rubbish/malba /similar unserviceable,dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. * DOUBLE SCAFFOLDING Providing and fixing double scaffolding system (cup lock type) on the exterior side,up to seven story height made with 40 mm dia M.S.tube 1.5 m centre to centre,horizontal & vertical tubes joining with cup & lock system with M.S.tubes,M.S.tube challies,M.S.clampsand M.S.staircase system in the * WATER PROOFING CEMENT PAINT Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface Water thinnable cement primer * ANTI-CORROSIVE BITUMASTIC PAINT Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work * SUPPLYING AND LAYING HDPE SHEET SUPPLYING AND LAYING HDPE SHEET OF 3 MM THICKNESS INCLUDING CUTTING, WELDING TO MAKE LEAK PROOF AND FIXING WITH GLUE IN POSITION. * LAYG OF ACID PROOF TILE 150x150x20mm/CRM Laying of acid proof tiles of size 150x150x20mm/230x113x20mm or any other available size laid with andesite putty including bedding layer 10mm mortar (after racking the joints including pointing with furan resin. (furan resin will be supplied by the contractor and acid proof tiles, liquid glass, sodium silica fluoride, andesite powder will be supplied free of cost by the deptt.) at all heights and depths as directed by the Engr. I/C. * LAYG OF ACID PROOF BRICK230x112x75mm/CRM Laying of acid proof bricks of size 230x112x75mm/230x112x65mm/230x112x30mm or any other available size laid with andesite putty including bedding layer 10mm mortar (after racking the joints including pointing with furan resin. (furan resin will be supplied by the contractor and acid proof bricks, liquid glass, sodium silica fluoride, andesite powder will be supplied free of cost by the deptt.) at all heights and depths as directed by the Engr. I/C. * POINTING W/FURAN RESIN CEMENT Supplying and pointing with furan resin cement conforming to IS part-II over acid proof bricks, tiles etc including racking all the joints complete as directed by the Engr. In charge at all depths and heights. (furan resign materials will be supplied by the contractor) * LAYG OF 5MM THK EPOXY RESIN PLASTER S
Tender Detail :	CEMENT CONCRETE: 1:2:4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) # DEMOLISHING CEMENT CONCRETE 1:3:6 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (I/c equivalent design mix) # DEMOLISHING R.C.C. WORK Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. # DEMOLISHING BRICK WORK IN CEMENT MORTAR Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of # DISMANTLING OLD PLASTER Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. # CHIPPG OF CONCRETE AT ALL HEIGHT Hatching & Chipping in all types of concrete average thickness of 40mm in walls, beams, columns & roof ceilings including cleaning the reinforcement at all heights & elevations & disposing the rubbish within a lead of 100M. # E.W IN EXCAVATION BY MECHANICAL MEANS.. Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil # FILLING AVAILABLE EXCAVATED EARTH Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. # CENTERING AND SHUTTERING Centering and shuttering including strutting, propping etc. and removal of # 12 MM CEMENT PLASTER : 1:6 12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) # 15 MM CEMENT PLASTER : 1:4 15 mm cement plaster on the rough side of single or half brick wall of mix # MODULAR BRICK WORK 1:6 Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand). # DISPOSAL OF BUILDING RUBBISH Disposal of building rubbish/malba /similar unserviceable,dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. # DOUBLE SCAFFOLDING Providing and fixing double scaffolding system (cup lock type) on the exterior side,up to seven story height made with 40 mm dia M.S.tube 1.5 m centre to centre,horizontal & vertical tubes joining with cup & lock system with M.S.tubes,M.S.tube challies,M.S.clampsand M.S.staircase system in the # WATER PROOFING CEMENT PAINT Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer # ANTI-CORROSIVE BITUMASTIC PAINT Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work # SUPPLYING AND LAYING HDPE SHEET SUPPLYING AND LAYING HDPE SHEET OF 3 MM THICKNESS INCLUDING CUTTING, WELDING TO MAKE LEAK PROOF AND FIXING WITH GLUE IN POSITION. # LAYG OF ACID PROOF TILE 150x150x20mm/CRM Laying of acid proof tiles of size 150x150x20mm/230x113x20mm or any other available size laid with andesite putty including bedding layer 10mm mortar (after racking the joints including pointing with furan resin. (furan resin will be supplied by the contractor and acid proof tiles, liquid glass, sodium silica fluoride, andesite powder will be supplied free of cost by the deptt.) at all heights and depths as directed by the Engr. I/C. # LAYG OF ACID PROOF BRICK230x112x75mm/CRM Laying of acid proof bricks of size 230x112x75mm/230x112x65mm/230x112x30mm or any other available size laid with andesite putty including bedding layer 10mm mortar (after racking the joints including pointing with furan resin. (furan resin will be supplied by the contractor and acid proof bricks, liquid glass, sodium silica fluoride, andesite powder will be supplied free of cost by the deptt.) at all heights and depths as directed by the Engr. I/C. # POINTING W/FURAN RESIN CEMENT Supplying and pointing with furan resin cement conforming to IS part-II over acid proof bricks, tiles etc including racking all the joints complete as directed by the Engr. In charge at all depths and heights. (furan resign materials will be supplied by the contractor) # LAYG OF 5MM THK EPOXY RESIN PLASTER Supplying and laying 5mm thick (average) epoxy resin plaster (phenyl resin based) over a coat of epoxy primer after cleaning the surface preparation by way of scrapping, solvent hot water soda/lime, air cleaning, surface free from oil etc to the floor, foundation, beams, slabs at all depth and height with all labour, materials, tools tackles etc complete with finishing coat of Epoxy paint as per specification and direction Engg.-In-charge. (Composition:-Araldite GY-257, Hardener HY-840 # DISMAN&REMVNG OF ACID PROOF TILES Dismantling & removal of acid proof tiles, bricks, plaster, and andesite putty, epoxy plaster, etc including removing base materials like bituminal, bitumastic tarfelt etc until base concrete is exposed including cleaning & neutralizing the concrete surface with lime water/soda, chipping, removing and disposing off loose concrete, stacking the salvaged materials at site and removing & disposing off all rubbish within a lead of 300 Mts. at all depths & heights as directed by the Engr. I # SUPPLY&MIXG RECRON 35 POLYSTER FIBER Supplying & mixing of Recron 35 Polyster construction Fiber CT 2024 (12mm Fiber) @ 0.25% by weight of cement as per direction of Engineer-in-charge. # Pr. Gr. drilling 20 mm dia & 50mm deep. Water proofing the entire RCC/CC/BM/SSM structures area by filling the voids within the structure by means of pressure grouting as described below:- Drilling holes of 20mm dia and 50mm deep near probable water seepage points, horizontal and vertical joints including comer and junctions. Additional holes for grouting shall be done at required spacing in the above locations in zigzag fashion.Necessary plastic spouts of 12mm dia shall be fixed in drilled holes with quick setting water proofing compound mixed with portland cement. pressure grouting shall be done with admixture of grouting compound and ordinary portland cement, plastic spouts shall be cut after a lapse of 1 hour after grouting and these holes shall be sealed with mixture of chemical and ordinary portland cement. # Pro poly plaster admixed with LATEX-SBR "Providing polymeric plaster of 20mm thickness to external walls surface, admixed with LATEX-SBR based polymer-modified waterproof compound at all heights, including dismantling/scrapping of old plaster, scaffolding etc. complete and removal of debris as directed (Dosages: 1Kg per 50Kg of Cement.)" # Packing joints with ther sheet 50x25mm Preparing the joint surface by removing the bituminous compound, dust and loose particles, cleaning the surface with wire brush and pressure water. The joints and packing extra depth (width and depth should be 2:1 ratio) with thermocol sheet, foam rods etc debond tape and applying primer- cum bonding agent to concrete surface and finally filling the expansion joints with two component polysulphide sealant as per manufacturers recomendation. Joint of size :50mmx25mm # ACRYLIC DISTEMPER Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coats on new work. # REMOVING OIL BOUND DISTEMPER Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. # PLASTER OF PARIS PUTTY Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. # ALUMINIUM WORK FOR DOORS, WINDOWS "Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for # 3 LAYER PARTICLE BOARD 12MM Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick # GYPSUM BOARD TILE 595X595 MM Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be # DISMANTLING GYPSUM PARTITIONS Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including # FLOAT GLASS PANES OF 5.50 MM Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness # HYDRAULIC DOOR CLOSER UPTO 35 KG Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. # Chipp trmmng of weak concrete upto 100mm "Removing/Chipping the weak/ affected/ Inserted nozzles/carbonated concrete up to 100mm thick or upto loose concrete by manually/ mechanical methods from R.C.C. structures complete including removal of debris from all heights & levels of expansion joints of both sides upto 250 mm." # Drlng of holes of spec. size in RCC Wall "Providing, drilling the holes of 14 mm dia, minimum 75 mm and upto half depth of structure at required location and spacing as peractual site condition and fixing of 12mm dia NRV (non return valve) packer as per the instruction of Engineer Incharge." # Providing and grouting low viscous resin "Providing & grouting low viscosity acrylate resin grout material Master Seal 901 of BASF make/ Sika Injection 306 or equivalent using high pressure grouting pump as per the manufacturer``s specification and as per the instruction of site in charge." # ProvD & grtng Master ROC MP 355/NitofiLL "Providing & grouting Master Roc MP 355 / Nitofil WS 60 or equivalent Highly reactive, two component polyurethane injection foam to stop high volume water ingress and using high pressure grouting pump as per the manufacturer``s specification and as per the instruction of site in charge." # PrVDNG & injCT. slvnt free PU INJ RESIN Providing and injecting solvent free polyurethrane (PU) injection resin based aqua reactive waterproofing material of SIKA,FOSROC or equivalent as per manufacturers specification complete with all type of work to make underground structure like wallslab ,basement ,tunnel,expansion joint etc prone to water bearing cracks of under continuous ingress/intrusion leak proof and watert tight. # S&A-capillary water prf sys for concrt c "Supply and application of deep penetrative, reactive, capillary waterproofing system for concrete coating on etheir sides of expansion joints upto 2 meter on both sides from ground level 7 meter to 15 meter height by Master Seal 502 of BASF make /. Brushbond TGP or" # FAB,FIX LUGS BY WLDG/BINDING W/WIRE Fabrications, fixing lugs by welding or binding with wire as per instruction & direction of Engineer-in-charge # SUPPLY/FIXG WELDED WIRE MESH Supplying & fixing welded wire mesh (IRC Fabric) 80x80x2.5mm (12 gauge) as per IS:1566/1982 of approved manufacturer & fixing with lugs by welding if required or by binding with wire. # SURFACE PREPARE FOR GUNITE PLASTER Preparing surface for gunniting including providing reinforced gunnite plaster 1:2 (1 Cement, 2 Sand) in 25mm thick over wire mesh fabric as per specification at all heights and elevations (Cement will be supplied free of cost at BSL stores). # Guniting additional layer of 20mm thick Providing additional each layers of 20mm thick gunite plaster of mix 1:2 (1 Cement, 2 Sand) over the existing gunited surface. (Cement will be supplied free of cost at store). # Drlng of holes 250mm dia usng HYD Eqpmnt Drilling of horizontal holes of 250 mm dia and 0.5 M depth in existing RCC foundation using HYDRAULIC Core cutting Equipment including arrangement of drilling equipment , labour , tools and tackles etc, including mobilization charges. # SATNA LIME WASH White washing with lime to give an even shade : New work (three or more coats)

Tender Location :	Jharkhand - India
Document Path :	Can be viewed by Subscribers
Tender Value :	INR 5507107
Tender Closing Date :	5/10/2026 at 00:00 Hrs.
Tender Opening Date :	6/10/2026 at 00:00 Hrs.
Address :	Can be viewed by Subscribers
Sub-Industry/Industry :	Stainless Steel - Iron and Steel